Need help?Do you have a question about the Tek-Air VorTek VT-5000 series and is the answer not in the manual?
General| Power Supply | 9V battery |
|---|---|
| Display | LCD |
| Warranty | 1 year |
| Type | Airflow Meter |
| Resolution | 0.01 m/s |
| Operating Temperature | 0 to 50°C |
| Storage Temperature | -20 to 60°C |
| Probe Length | 300 mm |
| Weight | 300 g |
Details how to mount and position VorTek probe bars in ducts, considering airflow and obstructions.
Details on connecting the VorTek probes to the transmitter using the provided cables and connectors.
Procedure for performing a zero check on the VorTek transmitter output using DIP switches and a voltmeter.
Steps to set the zero output for the VorTek transmitter using DIP switches and a potentiometer.
Procedure for setting the full scale output of the VorTek transmitter using a frequency generator.
Procedure to check the calibration of the VorTek transmitter at multiple frequencies.
Troubleshooting steps for when the VorTek transmitter has no signal output.
Steps to diagnose issues when the VorTek transmitter output is consistently at 4mA.
Diagnosing and resolving discrepancies between actual and indicated CFM readings.
To Next Page
