Need help?Do you have a question about the Teka EWH 50 D SLIM and is the answer not in the manual?
General| Type | Tank (water storage) |
|---|---|
| Fuel type | Electric |
| Boiler system | - |
| Product color | White |
| Heater location | Indoor |
| Placement supported | Horizontal/Vertical |
| Water tank capacity | 47 L |
| Insulation thickness | 18 mm |
| Solar batteries support | No |
| International Protection (IP) code | IPX4 |
| Thermometer | Yes |
| Annual energy consumption | 1243 kWh |
| Efficiency | 41.3 % |
| Noise level | 15 dB |
| Maximum power | 1200 W |
| Minimum power | 800 W |
| Thermostat range | 30 - 75 °C |
| Maximum operating pressure | 7.5 bar |
| Domestic Hot Water (DHW) flow | - l/min |
Weight and Dimensions| Depth | 250 mm |
|---|---|
| Width | 470 mm |
| Height | 860 mm |
Details on how to mount the main unit securely on a solid wall.
Guidance on connecting the water inlet and outlet pipes, including safety valves.
Detailed explanation of unit operation, buttons, and display indicators.
Ensuring proper earthing, rating, and dryness of electrical sockets.
Specifies installation height for sockets in splash-prone areas.
Wall load-bearing capacity requirements for safe installation of the heater.
Requirement to install the one-way safety valve on the cold water inlet.
Procedure for filling the heater with water before initial operation or after maintenance.
Normal dripping from pressure release hole and when to contact service.
Ensuring the drainage pipe from the pressure release hole slopes downwards.
Warning about hot water temperature and avoiding scalding during initial use.
Methods for draining water from the inner container via exit port or safety valve.
Instruction to use manufacturer-provided cords and professional replacement for damaged power cords.
Guidance on contacting professional personnel for damaged parts and using original spares.
Regular checks of plug/socket contact, grounding, and overheating for safety.
Procedure for draining the heater to prevent freezing in cold climates.
Recommended water hardness limits and implications for warranty.
Recommendation for regular cleaning of the inner tank and heating components.
Guidance on periodic checking of the magnesium anode and its replacement.
Cleaning instructions for the water heater's exterior surface.
Clarification on warranty coverage for maintenance performed by authorized services.
To Next Page
