Need help?Do you have a question about the Teka SHS 50 and is the answer not in the manual?
Automatic addition of cold water and automatic heating.
Multiple safety devices like dry heating and over-temperature protection.
Advanced enamel coating for rust, corrosion, and scale resistance.
Ensures safe and reliable operation with a longer lifespan.
Enhances product durability and lifespan.
Provides good thermal insulation for energy efficiency.
Ensures accurate and reliable temperature control.
Allows setting water temperature between 30 to 75°C.
Designed for straightforward user interaction and ease of use.
Details on wall mounting, hole positioning, and socket installation requirements.
Instructions for installing the safety valve and handling potential water dripping.
Procedures for draining water from the inner container via exit port or safety valve.
Guidance on replacing power cord and handling damaged parts.
Regular checks for secure contact and grounding of plug and socket.
Draining water when the heater is unused in low temperatures.
Guidelines on water hardness limits and use of decalcifying systems.
Recommendations for regular cleaning of the inner tank and heating components.
Periodic inspection and replacement of the magnesium anode.
Advice on cleaning the heater surface with mild soap and water.
Troubleshooting for a non-functional heating indicator light.
Diagnosing and resolving issues with no hot water flow.
Troubleshooting for excessive water temperature issues.
Addressing problems related to water leakage from pipe joints.
To Next Page
General
