9
4. Touch any key to stop the alarm. The
symbol will then disappear.
If you wish to modify the time on the buzzer,
press or until the flash and the
hours are not flashing; then press and
repeat the steps shown. Upon entering the
timer control, the time currently remaining will
appear which you will be able to adjust.
Programing Cooking Time
1. Select a function and a cooking
temperature using the oven commands.
2. Press or until the symbol on the
display starts flashing, then press . The
0_00 ar on the
display.
3. Select the time after which you want the
alarm to sound by pressing or .
4. Press to select the option. You will
hear 2 beeps to confirm that the time has
been set and the clock will start counting
down from the selected time. The
symbol will flash slowly.
5. Once the cooking time is up, the oven will
turn off, an alarm will sound and the
symbol will flash.
6. Press to stop the alarm and turn off
the symbol. The oven will switch on
again.
7. Set the controls to position to turn off
the oven.
You can change the remaining cooking time
at any time by touching or until the
symbol starts to flash quickly. Press
to change the time.
Programing the Cooking Stop Time
1. Select a cooking function and a
temperature.
2. Press or until the symbol on the
display starts flashing, then press .
The current time will appear on the
display.
3. Select the time after which you want the
alarm to sound by pressing or .
4. Press to confirm. You will hear 2
beeps to confirm that the time has been
set and the selected cooking stop time
appears on the display. The symbol
will flash slowly.
5. When the cycle is finished, the oven will
turn itself off, an alarm will sound and the
symbol will flash quickly.
6 Press to stop the alarm and turn off
the symbol. The oven will switch on
again.
7. Set the controls to position to turn off
the oven.
You can change the remaining cooking time
at any time by touching or until the
symbol starts to flash quickly. Press
to change the time.
With the Buzzer function, the oven will not
turn off when the time expires.
With the Buzzer function, the remaining
time will show permanently on the
display. With this programed function, it is
not possible to view the time or the total
programed cooking time.