8
Press to confirm the hours.
Press or to adjust the minutes.
Press to confirm the minutes.
If you wish to modify the time, press
or until the time starts flashing. Press
and follow the instructions in the
previous points.
HIDING AND UN-HIDING THE CLOCK
If you wish to hide the clock press for
5 seconds.
If you wish to see the clock on the
display again, press for 5 seconds.
OVEN FUNCTIONS
After setting the clock, the oven is ready
for use. Select a cooking function with
the function selector dial and
temperature with the temperature control
dial.
You will notice that the symbol lights
up during cooking to indicate that heat is
being transmitted to the food. This
symbol disappears when the selected
temperature has been reached.
Set the controls to to turn off the oven.
OVEN TIMER OPERATION
Programing the buzzer
1. Touch or until the symbol on
the display starts flashing, then press
0_00
display.
2. Select the time after which you want the
alarm to sound by pressing or . You
will hear 2 beeps to confirm that the time
has been set and the clock will start
counting down from the selected time.
The symbol will flash slowly.
3. Once the time has expired, an acoustic
signal will sound for 90 seconds and the
symbol will flash quickly.
In the event of power failure, the clock
settings will be erased and 12:00 will flash
on the clock display. Reset it and program
again.
In models with an electronic temperature
control, when the selector switch is
turned, the display will show the
temperature.
After selecting the temperature, the clock
will automatically reappear.
When a cooking cycle begins, the oven
will automatically display the total the
time for the cycle progress, if the cooking
time or cooking stop time have not been
set.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
