14
You can access the programming options at
any time during cooking. Similarly, you can
change an existing program.
PROGRAMMING THE TIMER OPTIONS
Programing during cooking.
1. Press the button to access the timer
options menu.
2. Turn the left dial to select the desired
program option.
3. Turn the right dial to choose the duration
or finish time depending on the chosen
option.
4. Confirm your choice with the button.
5. The cooking screen will then be shown
again. You will be able to see
programmed timers to the right of the
central circle.
SAFETY BLOCK
This function can be selected at any time
while using the oven.
With the oven switched off. The child lock
will not allow the oven to be switched on
when the button is touched.
With the oven in use. If the feature is
activated while the oven is cooking or set to
delay, the keypad will not respond and it
will not be possible to use the dials or
change the cooking settings.
To activate this feature press and hold the
and buttons simultaneously until you
hear a beep and the symbol appears on
the screen. The control panel is now locked.
To deactivate this feature touch and hold
the and buttons simultaneously again
until you hear a beep and the symbol
disappears.
To program this option, set the Cooking
Duration and Finish Time consecutively.
The oven will not allow you to select a
finish time before the time it is now.
When programming a finish time, the
center section will show the current time
to help you choose.
To Next Page
Loading...
