Why isn't the load detection system working on my Teka TK3 1490 WD?
If the load detection system on the screen of your Teka Washer isn't working while loading the machine, it might be because laundry is placed into the machine without choosing a washing or drying programme. Remove the laundry, switch the programme knob to CANCEL, reselect the programme, then load the laundry and run the machine.
General| Door hinge | Left |
|---|---|
| Control type | Buttons |
| Loading type | Front-load |
| Product color | White |
| Built-in display | Yes |
| Appliance placement | Freestanding |
| Half-load | - |
| Drying capacity | 6 kg |
| Washing capacity | 9 kg |
| Delay start (max) | 24 h |
| Spin-drying class | A |
| Maximum spin speed | 1400 RPM |
| Minimum spin speed | 400 RPM |
| Noise level (spin) | 77 dB |
| Number of washing programs | 15 |
| Water consumption washing per cycle | 112 L |
| Energy consumption washing per cycle | 6.12 kWh |
| Water consumption washing & drying per cycle | - L |
| Energy consumption washing & drying per cycle | - kWh |
Weight and Dimensions| Depth | 582 mm |
|---|---|
| Width | 597 mm |
| Height | 845 mm |
Instructions for correct usage, general warnings, and safety precautions.
Covers burn, electrocution, explosion, fire, fall, injury, and child safety risks.
Instructions for removing safety screws before initial appliance use.
Guidance on proper placement and adjusting the appliance's feet for stability.
Steps for safely connecting the machine to electrical and water supplies.
How to sort laundry, understand symbols, and load the machine correctly.
Guidance on choosing and placing detergent and softener in the drawer.
Selecting programmes, using auxiliary functions, temperature, and spin speed.
Cleaning the detergent drawer, water inlet filters, and pump filter.
Solutions for common problems like machine not starting or not draining.
Interpreting error codes (E01-E04) and performing corrective actions.
To Next Page
