Service Manual
SPA WASHING MACHINES (TKD)
Service Manual: MSWM15043 EN - 7 -
- Pressing [K8], it turns back to the service menu
Dryer (only washer-dryer appliance)
- Pressing [K8], display will show “dry”.
- Pressing once more [K8], dryer fan and dryer heating element are activated
and display will show alternately “In” (dryer sensor temperature) y “Out”
(temperature for the sensor located in the exit).
NOTE: in case of failure with one of the dryer sensors, the appliance does not
show any error.
Autotest (see section 4)
- Pressing [K8], display will show “LSt”. Pressing once more [K8], a complete
auto-test is running. It tests the display, load water for both valves, heating
process, drain pump and spin motor (low speed and spin cycle). For the washer-
dryer, this test also checks the dryer components (fan, heating element…)
To Next Page
Loading...
