Teknim TFS-3192R - User Manual

TFS-3192R / TFS-3192W
Conventional Fire Alarm Siren With Strobe
Installation & Operating Guide
Release Date: 14/12/2017
Revision Date: 12/08/2022
Rev:02
Important Warnings
General
✓ Before using the device read this manual carefully. Keep it just in case of necessity.
✓ Abide all the rules and precautions stated in the manual. Follow all the instructions one by one.
✓ Keep the devices away from water and moisture
Service
Do not try to fix the device on your own. Removal of cover may end up with electricity shock.
In case of any defect or malfunction, contact with your dealer or with authorized service. All the technical
interventions have to be done by technicians of company.
Malfunctions that require technical service
In case of any malfunction or below conditions contact with your authorized service,
✓ When Mains cable or the plug is harmed,
✓ Contact of device with a fluid,
✓ Exposure of rain and water,
✓ Fell down of device or harmed outer cover,
✓ Serious performance fall on the device,
✓ Depending on the instructions stated in manual, if your device not working properly
Contact with your authorized service in such terms.
Maintenance on your own
Do not try to fix the device on your own. Removal of cover may end up with electricity shock. In case of any
defect or malfunction, contact with your dealer or with authorized service. All the technical interventions have
to be done by technicians of company. Device must be cleaned up with a dry fabric. No-chemicals are allowed
for cleaning
Transportation
Device must be carefully transported avoiding all physical bump, stroke and possible fluid entry. Malfunctions
that caused by improper transportation is not under warranty.
Human and Environmental Health
This device contains no chemical or biological elements that could harm human condition.
TFS-3192R
Conventionel Fire Alarm Siren Whit Strobe Yangın Alarm, Red
TFS-3192W
Conventionel Fire Alarm Siren Whit Strobe Yangın Alarm, White
Technical Features
Power Input
24VDC – 28VDC
Alarm Current Consumption
~19 mA ( @24VDC )
Sound Level
100 dB±2 dB (24VDC,1 metrede)
IP Class
IP21C
Operating Temperature Range
-10C ~ 55C
Humidity
@ +40°C between %0 to %95 Max
Dimensions (mm)
Ø:110mm, h:55mm
Housing Material
Red/White, UL94 fireproof polycarbonate
Used Cable Cut
0.28mm ² ~ 1.5mm ²
Leds
Wide Angle 7 bright LEDs
Piezo
Piezzo with leakproof seal
Kapsama Alanı
W-2,4-4
Kullanım Alanı
Internal use in building / Sounder type: Type A device
Terminals
Number 1
To next siren Negative (-)power out
Number 2
Negative (-)power input
Number 3
To next siren Positive (+)power out
Number 4
Positive (+) power input
EN 54-23 Visual Alarm Devices Weighted Sound Level Shape
Mounting and Connection
Warning: Do not attempt to remove the electronic board from its plastic case. The electronic board is
closed for your safety. Users should avoid from interference.

Summary

Important Warnings and Safety Precautions

General Safety Guidelines

Read the manual carefully, follow all instructions, and keep devices away from water and moisture.

Service and Repair

Do not attempt self-repair; contact authorized service for any defects or malfunctions.

Critical Safety Warning

Warning: Do not remove the electronic board from its plastic case for user safety.

Troubleshooting and Maintenance

Malfunctions Requiring Technical Service

Contact authorized service for issues like damaged cables, fluid contact, or performance loss.

Self-Maintenance and Cleaning

Avoid self-repair due to shock risk. Clean only with a dry fabric; no chemicals.

Product Handling and Information

Transportation Guidelines

Transport carefully, avoiding bumps and fluid entry to prevent warranty-voiding malfunctions.

Human and Environmental Health

Device contains no chemical or biological elements harmful to human condition.

Installation and Wiring

Mounting the Base

Mount the base part on the wall using the provided markings.

Connecting the Cable

Connect the siren cable to the terminal block, ensuring correct direction for panel connection.

Connecting Multiple Sirens

Link subsequent sirens by connecting existing terminal 1 to the next siren's terminal 2.

Testing Procedures

Initial Siren Test

Check for fault occurrence when the panel starts and verify correct connections.

Panel Supported Test

If no fault, initiate the panel test position and run the siren test.

Test Completion Criteria

Test is complete if the device sounds uninterrupted and warning lights blink.

Teknim TFS-3192R Specifications

General

Brand	Teknim
Model	TFS-3192R
Category	Fire Alarms
Language	English