Need help?Do you have a question about the Tekno SCT410.3 and is the answer not in the manual?
General| Scale | 1/10 |
|---|---|
| Drive Type | 4WD |
| Motor Type | Brushless |
| Battery Type | LiPo |
| Motor | Not included |
| ESC | Not included |
| Servo | Not included |
| Battery | Not included |
| Radio | Not included |
| Chassis | Aluminum |
| Suspension | Independent |
| Type | 1/10 Scale 4WD Short Course Truck |
Introduction to the Tekno RC SCT410.3, including essential safety and warranty information.
Detailed assembly of the center differential.
Building the front and rear differentials.
Instructions for assembling the front and rear gearboxes.
Building the rear suspension arms and sway bar system.
Assembling rear hubs, CV joints, and camber links.
Building the front suspension and steering components.
Assembling front hubs, CV joints, and camber links.
Detailed steps for assembling the steering system.
Assembling front end components and integrating them with the chassis.
Completing the vehicle assembly, including electronics and battery.
Installing nerf bars, body mounts, wheels, and body.
Comprehensive instructions for filling and bleeding front and rear shocks.
Building the front shock absorbers for the vehicle.
Detailed list of all included parts, hardware, and optional components.
Sheet for recording and adjusting vehicle settings like suspension and differentials.
To Next Page