Tekonsha PRODIGY iD 90920 User Manual

Electronic Brake Control with EDGE
™
For 2, 4, 6 and 8 brake (or 1–4 axles) applications
READ THIS FIRST:
Read and follow all instructions
carefully before installing or
operating the PRODIGY iD. Keep
these instructions with the Brake
Control for future Reference.
Components of PRODIGY iD ........................ 4 en
Installation Instructions ............................. 5 en - 17 en
Tekonsha Edge
™
App Instructions ................... 18 en
Operating Instructions ............................. 19 en - 39 en
Appendix, Patent Information, Drill Template ......... 40 en - 43 en
Table of Contents
Scan QR Code For French or
Spanish Language Instructions
and Enter Part Number 90920.
1. WARNING The PRODIGY iD may be operated with reduced
performance if the Dash Module is removed or disconnected
while the trailer is in use.
2. Do not mount or activate RF generating items (such as two-way
radios) near (less than 12in to the Dash Module or Power Module).
3. The PRODIGY iD employs an internal sensor. It senses deceleration
and generates an output that is based on deceleration, thus the
term “Proportional Braking”.
4. The PRODIGY iD will “HOLD” your trailer with 25% of power
setting while you are at a standstill with brake pedal applied for
longer than 5-7 seconds.
5. The PRODIGY iD will brake proportionally in reverse. It will apply
the appropriate brake voltage based on deceleration.
6. WARNING The Gross Combined Weight Rating (GCWR) must
never exceed the vehicle manufacturers’ recommendation.
7. WARNING Follow all installation and mounting instructions
to allow the inertial sensor to operate properly.
8. For Technical Assistance and Warranty Information call:
1-800-632-3290 or www.tekonsha.com
9. Tekonsha EDGE
™
App is not required for use, but adds additional
features.
Important Facts to Remember
- 2 en - - 3 en -
Instruction and Operating Manual
BRAKE CONTROL
90920
ENGLISH

Tekonsha PRODIGY iD 90920 Specifications

General

Display	Digital
Voltage Range	9-16V DC
Manual Override	Yes
Boost Feature	Yes
Product Type	Brake Controller
Type	Electric Brake Controller
Input Voltage	12V
Operating Voltage	12V
Number of Axles	1 to 4
Mounting Type	Dash
Boost Settings	3

Summary

READ THIS FIRST

Important Facts to Remember

Safety and Usage Precautions

Key warnings and information regarding proper use and potential hazards.

Installation Instructions

Determine Mounting Location

Dash Module and Display Assembly Mounting

Guidance on mounting the Dash Module and Display, including safety warnings.

Dash Module Mounting Orientation

Details on the correct orientation for the Dash Module for optimal sensor performance.

Automatic Leveling of the Sensor

Dash Module Assembly and Installation

Step-by-step instructions for assembling and securely mounting the Dash Module.

Vehicle Wiring

Wiring Connections and Safety

Details on vehicle wiring, grounding, and connections with warnings.

Programming Menu/Sub Menu Display Setting Options

Menu Navigation Guide

Step-by-step guide on how to navigate and use the programming menu.

Power Output

Setting Maximum Brake Output

Instructions on how to set the maximum power output for trailer brakes.

Boost

Boost Feature Settings and Menu

Explanation of the Boost feature, its levels, and how to configure it via the menu.

Troubleshooting Chart

Display and Connection Issues

Troubleshooting common display blank, trailer disconnected, or power issues.

Power and Circuit Faults

Braking and Communication Errors