tekton TRQ-21101 - User Manual

®
Model
TRQ-21101
STORE THIS MANUAL IN A SAFE
PLACE FOR FUTURE REFERENCE
888-648-3371
support@tekton.com
NEED HELP?
!
?
TORQUE WRENCH
OPERATOR’S MANUAL
• At low torque settings, pull wrench slowly to observe click.
Please read and understand entire manual, including all safety information, before using torque
wrench. This tool is a precision measuring instrument. Handle with care and store properly. Do
not attempt to increase leverage of this wrench with any other device. Failure to follow all
instructions could result in damage to torque wrench, property damage, or injury.
• Wrench is shipped ready to use, calibrated and tested to an accuracy of +/- 4% in CLOCKWISE
direction and +/- 6% in COUNTERCLOCKWISE direction. To maintain this accuracy, it is
important that wrench is stored with torque scale at lowest setting, 10 in.-lb (1.1 Nm). This
setting relieves extra tension on the internal spring, eliminating fatigue that can adversely affect
accuracy.

Summary

TEKTON Torque Wrench Operators Manual

Important Safety Precautions

Read and understand all safety information before using the torque wrench to prevent damage or injury.

Setting Torque Reading on Your Torque Wrench

Setting Torque in Inch Pounds (in.-lb.)

Steps to set torque using inch pounds, including coarse and fine scale adjustments.

Setting Torque in Newton Meters (Nm)

Steps to set torque using Newton meters, similar to in.-lb. adjustments.

Operating the TEKTON Torque Wrench

Maintenance and Storage Guidelines

Torque Wrench Specifications and Components

Exploded View Diagram of Components

Illustration of torque wrench components for identification purposes. Do not disassemble.

Key Product Specifications

Details on drive size, ratchet, length, dual range, increment, and accuracy.

tekton TRQ-21101 Specifications

General

Brand	tekton
Model	TRQ-21101
Category	Tools
Language	English