Tektronix 114 - Page 36

Parts List — Type 114
CABINET (Cont'd)
REF.
NO.
PART NO.
SERIAL/MODEL NO.
Q
T
Y.
DESCRIPTION
EFF. DISC.
4 426-0255-00
1
FRAME, front, top
-
mounting hardware: (not included w/frame)
212-0002-00
4
SCREW, 8-32 xy 4 inch, 100° CSK FHS phillips
5 351-0095-00
1 GUIDE, left
-
mounting hardware: (not included w/guide)
212-0023-00
1
SCREW, 8-32 x % inch, BHS
210-0007-00
1
LOCKWASHER, external, #8
6
377-0119-00
4 INSERT, foot
7
348-0073-00
1
FOOT, bail limiting, left front — right rear (pair)
-
mounting hardware for left front: (not included w/foot)
211-0532-00
2
SCREW, 6-32 x 3 / 4 inch, Fil HS
210-0457-00
1 NUT, keps, 6-32 x 5 / i , 6 inch
348-0074-00
1
FOOT, bail limiting, right front — left rear (pair)
-
mounting hardware for right front: (not included w/foot)
211-0532-00
2 SCREW, 6-32 x % inch, Fil HS
348-0073-00
1
FOOT, bail limiting, right rear — left front (pair)
-
mounting hardware for left rear: (not included w/foot)
211-0532-00
2
SCREW, 6-32 x 3 / 4 inch, Fil HS
210-0457-00
1
NUT, keps, 6-32 x 5 / 16 inch
348-0074-00
1
FOOT, bail limiting, left rear — right front (pair)
-
mounting hardware for right rear: (not included w/foot)
211 -0532-00
2 SCREW, 6-32 x% inch, Fil HS
8
348-0072-00
1
FOOT, flip-stand bail
9
426-0252-00
1
FRAME, front, right
10
367-0052-00
1 HANDLE
-
mounting hardware: (not included w/handle)
212-0040-00
2 SCREW, 8-32x 3 /s inch, 100° CSK FHS phillips
11 367-0050-00
1
HANDLE, pivot, right
367-0051-00
1
HANDLE, pivot, left
12
214-0558-00
2 WASHER, thrust
13 214-0554-00
2 BOLT, hinge
14 377-0122-00
1 INSERT, pivot, right
377-0123-00
1
INSERT, pivot, left
15
377-0121-00
1
INSERT, frame, left
377-0120-00
1
INSERT, frame, right
16
351 -0094-00
1
GUIDE, right
5-8