Need help?Do you have a question about the Tektronix 114 and is the answer not in the manual?
General| Output Impedance | 50 Ω |
|---|---|
| Polarity | Positive or Negative |
| Trigger Modes | Internal, External |
| External Trigger Input | TTL Compatible |
| Sync Output | TTL Compatible |
Provides a general overview and description of the Type 114 pulse generator.
Details on pulse period, width, amplitude, and output impedance.
Operating conditions, dimensions, and connector types.
Information on accessories supplied with and available for the instrument.
Definitions of key terms used throughout the manual.
Explains the function and purpose of each control and connector on the front panel.
Step-by-step instructions for initial setup and operation.
Demonstrates how to configure the unit for delayed trigger output.
Instructions for changing the unit's input voltage configuration.
Overview of the manual's circuit theory explanations.
Detailed explanation of the Period and Width Generator circuits.
Description of the trigger output stage and the output amplifier.
Explanation of the instrument's power supply design and operation.
Guidelines for routine upkeep, cleaning, and troubleshooting.
Guidance on identifying, replacing, and soldering electronic components.
Covers power supply, period, width, amplitude, and trigger calibration.
Instructions on how to order replacement parts from Tektronix.
A guide to common abbreviations and symbols used in the manual.
Comprehensive lists of parts and diagrams illustrating assembly.
Details and illustrations of the accessories that come with the instrument.
Specifies the conditions and settings used for instrument calibration.
To Next Page
