Tektronix MSO2000B Series Programmer's Manual

Commands Listed in Alphabetical Order
CURSor:XY:PO
Lar:THETA:DELta? (Query Only)
Returns the XY cursor polar angle delta.
Group
Cursor
Syntax
CURSor:XY:POLar:THETA:DEL ta?
CURSor:XY:POLar:THETA:POSITION<x>? (Query Only)
Returns the cursor X or cursor Y polar coordinate, where x is either 1 or 2.
Group
Cursor
Syntax
CURSor:XY:POLar:THETA:POS ITION<x>?
CURSor:XY:POLar:
THETA:UNIts? (Query Only)
Returns the cursor coordinate units.
Group
Cursor
Syntax
CURSor:XY:POLar:THETA:UNI ts?
CURSor:XY:PRODUCT:DELta? (Query Only)
Returns the difference between the cursors X position and cursor Y position. The
ΔX×ΔY value is calculated as (X2 – X1) × (Y2 – Y1).
Group
Cursor
Syntax
CURSor:XY:PRODUCT:DELta?
2-120 MSO2000B, DPO2000B, M SO2000 and DPO2000 Series Oscilloscopes Programmer Manual

Tektronix MSO2000B Series Specifications

General

Analog Channels	2 or 4
Vertical Resolution	8 bits
Digital Channels	16
Waveform Capture Rate	5, 000 wfms/s
Display	7-inch WVGA (800 x 480) color TFT LCD
Trigger Types	Edge, Pulse Width, Logic, Video
Serial Bus Analysis	I2C, SPI, CAN, LIN, RS-232/422/485/UART
Probe Interface	TekVPI
Connectivity	USB 2.0
Power Supply	100 to 240 VAC
Dimensions	368 mm
Sample Rate	1 GS/s (2 GS/s with interleaving)
Record Length	1 M points (standard), up to 10 M points (optional)