Commands Listed in Alphabetical Order
Examples
DATA:SOURCE? might return :DATA:SOURC E REF2 indicating that the source for
the waveform d ata which is transferred using a CURVe? query is reference 2.
DATA:SOURCE CH1 specifies that the CH1 waveform will be transferred in the
next CURVe? query.
DATa:STARt
Sets or returns the starting data point for incoming or outgoing waveform transfer.
This comma nd allows for the transfer of partial waveforms to and from the
oscilloscope.
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-131
To Next Page
Loading...
