Tektronix MSO2000B Series Programmer's Manual

Commands Listed in Alphabetical Order
Group
File System
Syntax
FILESystem:FREESpace?
Related Commands
FILESystem:FREESpace?, FILESystem:CWD
FILESystem:MKDir (No Query Form)
Creates a new folder.
Group
File System
Syntax
FILESystem:MKDir <directory path>
Related Commands
FILESystem:CWD, FILESystem:DIR?
Arguments
<directory path> is a quoted string that specifies the directory to create
Examples
FILESYSTEM:MKDIR "E:/ NewDirectory" creates the directory named
NEWDIRECTORY at the root of the E drive.
These two commands create the directory MYNEWSUBDIRECTORY within the
existing directory mydirectory at the root of the E drive:
FILESYSTEM:CWD "E:/MyDirectory";:FILESYS TEM:MKDIR
"MyNewSubDirectory"
This, of course, assumes that E:/MYDIRECTORY already existed and was not
a read-only directory.
FILESystem:READFile (No Query Form)
Writes the contents of the specified file to the specified interface. If the file does
not exist or is not readable, an appropriate error event is posted.
Group
File System
Syntax
FILESystem:READFile <QString>
2-158 MSO2000B, DPO2000B, M SO2000 and DPO2000 Series Oscilloscopes Programmer Manual

Tektronix MSO2000B Series Specifications

General

Analog Channels	2 or 4
Vertical Resolution	8 bits
Digital Channels	16
Waveform Capture Rate	5, 000 wfms/s
Display	7-inch WVGA (800 x 480) color TFT LCD
Trigger Types	Edge, Pulse Width, Logic, Video
Serial Bus Analysis	I2C, SPI, CAN, LIN, RS-232/422/485/UART
Probe Interface	TekVPI
Connectivity	USB 2.0
Power Supply	100 to 240 VAC
Dimensions	368 mm
Sample Rate	1 GS/s (2 GS/s with interleaving)
Record Length	1 M points (standard), up to 10 M points (optional)