Tektronix MSO2000B Series

Commands Listed in Alphabetical Order
Syntax
MARK:CREATE {C
H<x>|MATH|B<x>|REF<x>|COLUM N|DIGItal}
Arguments
CH<x> creates the mark on a channel waveform, where <x> is the channel number.
MATH creates the mark on the math waveform.
B<x> creates the mark on a bus waveform, where <x> is the bus number.
REF<x> creates the mark on a reference waveform, where <x> is the reference
waveform number.
COLUMN creates marks on all waveforms in the current zoom pixel
column.
DIGItal creates marks on a digital waveform. (An error will result if no digital
channel is turned on.)
MARK:DELEte (No Query Form)
Deletes a mark on a particular waveform, all waveforms in a column, the selected
mark, or all marks.
Group
Mark
Syntax
MARK:DELEte {CH<x>|MATH|B<x>|REF<x>|CO LUMN|DIGItal}
Arguments
CH<x> deletes the mark on a channel waveform, where <x> is the channel number.
MATH deletes the mark on the math waveform.
B<x> deletes the mark on a bus waveform, where <x> is the bus number.
REF<x> deletes the mark on a reference waveform, where <x> is the reference
waveform number.
COLUMN deletes marks on all waveforms in the current zoom pixel column.
DIGItal deletes all marks on all digital channels.
MARK:FREE? (Query Only)
Returns how many marks are available for use.
Group
Mark
Syntax
MARK:FREE?
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-175