Tektronix MSO2000B Series

Commands Listed in Alphabetical Order
SEARCH:SEARC
H<x>:TRIGger:A:LEVel
Sets or returns the level for an edge trigger search to deter mine where to place a
mark. <x> is the search number.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger: A:LEVel {<NR3>|T
TL|ECL}
SEARCH:SEARCH<x>:TRIGger: A:LEVel?
Arguments
<NR3> specifies the trigger level, in volts.
TTL specifies a preset TT L high level of 1.4 V.
ECL specifies a preset ECL high level of – 1.3 V
SEARCH:SEARCH<x>:TRIGger:A:LEVel:CH<x>
Sets or returns the level for an edge trigger search to deter mine where to place a
mark.
SEARCH<x> is the search number and CH<x> is the channel number. Each
channel can have an inde pendent level.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger: A:LEVel:CH<x> {<NR3>|TTL|ECL }
SEARCH:SEARCH<x>:TRIGger: A:LEVel:CH<x>?
Arguments
<NR3> specifies the trigger level in volts.
TTL specifies a preset TT L high level of 1.4 V.
ECL specifies a preset ECL high level of – 1.3 V
SEARCH:SEARCH<x>:TRIGger:A:LEVel:MATH[1]
Sets or returns the math waveform level for an edge trigger search to determine
where to place a mark. <x> is the search number. The value of MATH is 1 for
all oscilloscopes.
Group
Search
2-264 MSO2000B, DPO2000B, M SO2000 and DPO2000 Series Oscilloscopes Programmer Manual