Tektronix MSO2000B Series

Commands Listed in Alphabetical Order
SEARCH:SEARC
H<x>:TRIGger:A:LOGIc:PATtern:WHEn:MORELimit
Sets or returns the minimum time that the selected pattern may be true and still
generate an A logic pattern search to place a mark. <x> is the search number.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A :LOGIc:PATtern:WHEn:MORELimit
<NR3>
SEARCH:SEARCH<x>:TRIGger:A :LOGIc:PATtern:WHEn:MORELimit?
Arguments
<NR3> specifies the minimum amount of time to hold the pattern true.
SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:CH<x>
Sets or returns the channel threshold level for a logic trigger search to determine
wheretoplaceamark.
SEARCH<x> is the search number and CH<x> is the
channel number.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A :LOGIc:THReshold:CH<x>
{<NR3>|TTL|ECL}
SEARCH:SEARCH<x>:TRIGger:A :LOGIc:THReshold:CH<x>?
Arguments
<NR3> specifies the threshold voltage le
vel.
TTL specifies a preset TTL high level of 1.4 V.
ECL specifies a preset ECL high level of –1.3 V.
SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:MATH
Sets or returns the math waveform threshold level for a logic trigger search to
determine where to place a mark. <x> is the search number.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A :LOGIc:THReshold:MATH
{TTL|ECL|<NR3>}
SEARCH:SEARCH<x>:TRIGger:A :LOGIc:THReshold:MATH?
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-271