Commands Listed in Alphabetical Order
Arguments
<NR3> is the pro
be range, which is probe dependent.
AUXin:PRObe:GAIN
Sets or returns the gain factor of a probe that is attached to the Aux In input.
Group
Vertical
Syntax
AUXin:PRObe:GAIN <NR3>
AUXin:PRObe:GAIN?
Arguments
<NR3> is the probe gain, which is probe dependent.
Examples
AUXin:PROBE:GAIN? might return :AUXin:PROBE: GAIN 100.0000E-3
indicating that the attached 10x probe delivers 0.1 V to the Aux In BNC for every
1.0 V applied to the probe input.
AUXin:PRObe:ID:SERnumber? (Query Only)
Returns the serial number o f the probe that is attached to the auxiliary input.
Group
Vertical
Syntax
AUXin:PRObe:ID:SERnumber?
AUXin:PRObe:ID:TYPE? (Query Only)
Returns the type of probe that is attached to the auxiliary input.
Group
Vertical
Syntax
AUXin:PRObe:ID:TYPE?
AUXin:PRObe:RESistance? (Query Only)
Returns the resistance of the pr obe attached to the front panel Aux In connector.
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-71
To Next Page
Loading...
