Tektronix MSO2000B Series

Commands Listed in Alphabetical Order
OFF does not inc
lude the read/write bit in the address.
ON includes the read/write bit in the address.
Examples
BUS:B1:I2C:ADDRESS:RWINCL UDE ON includes the read/write bit in the
address.
BUS:B1:I2C:ADDRESS:RWINCL UDE? might return
BUS:B1:I2C:ADDRESS:RWINCL UDE 0 indicating that the read/write bit is
not included in the address.
BUS:B<x>:I2C{:CLOCK|:SCLK}:SOUrce
Sets or returns the I2C SCLK source for bus <x>, where x is the bus number.
Conditions
This command requires a DPO2EMBD application module.
Group
Bus
Syntax
BUS:B<x>:I2C{:CLOCK|:SCLK }:SOUrce {CH1|CH2|CH3|CH4 |
D0|D1|D2|D3|D4|D5|D6|D7|D 8|D9|D10|D11|D12|D13|D14|D15}
BUS:B<x>:I2C{:CLOCK|:SCLK }:SOUrce?
Arguments
CH1–CH4 specifies the analog channel to use as the I2C SCLK source.
D0–D15 specifies the digital channel to use as the I2C SCLK source.
BUS:B<x>:I2C{:DATA|:SDATA}:SOUrce
Sets or returns the I2C SDATA source for bus <x>, where x is the bus
number.
Conditions
This command requires a DPO2EMBD application module.
Group
Bus
Syntax
BUS:B<x>:I2C{:DATA|:SDATA }:SOUrce {CH1|CH2|CH3|CH4 |
D0|D1|D2|D3|D4|D5|D6|D7|D 8|D9|D10|D11|D12|D13|D14|D15}
BUS:B<x>:I2C{:DATA|:SDATA }:SOUrce?
2-76 MSO2000B, DPO2000B, MSO2000 and DPO2000 Series O scilloscopes Programmer Manual