Need help?Do you have a question about the Tektronix PS280 and is the answer not in the manual?
General| Brand | Tektronix |
|---|---|
| Model | PS280 |
| Category | Power Supply |
| Language | English |
Check items like line voltage selectors and fuse before first-time operation.
Overview of front-panel controls, connectors, and indicators for the PS280/PS283.
Procedure for safely powering on the PS280 or PS283 after proper setup.
Explains the crossover point where voltage mode transitions to current mode based on load.
Procedure to set the current limit lower than the device's maximum safe current before connecting.
Describes independent operation and series/parallel tracking modes for the power supplies.
Connects outputs internally for 0 to 60 V output, controlled by master supply.
Connects outputs internally for 0 to 30 V at 0 to 4 A output, controlled by master supply.
To clean the power supply, use a soft cloth dampened in mild detergent and water. Avoid harsh chemicals.
Use a corrugated carton with adequate space, plastic bag, and stabilizing material for shipping.
Steps to isolate faults: check power switch, output terminals, fuse, line settings, and power cord.
Items shipped with the power supply, including fuses, test leads, user manual, and power cord.
Available accessories include different fuses and power cords.
To Next Page
