Telca TAC-12D-10 - Table of Contents; Technical Data; General

To Next Page

To Previous Page

Service manual: TAC-12D-10

1/9

Contents:

1. General

2. Technical data

3. Assembly

4. Electrical connection

5. Commencing operation and control behavior

6. Maintenance

1. General

The cooling circuit is designed in the form of a maintenance-free, hermetically sealed

system. The cooling unit is filled with the required quantity of refrigerant at the factory,

checked for leaks, and subjected to a functional test run. The installed maintenance-free

fans are mounted on ball bearings, protected against moisture and dust, and fitted with a

temperature monitor. The life expectancy is at least 30,000 operating hours. The cooling

unit is thus largely maintenance-free. All that may be required from time to time is to

clean the components of the external air circuit using a vacuum cleaner or compressed

air if they become visibly dirty.

Maintenance interval: 12 months. Depending on the level of contamination in the

ambient air, the maintenance interval may be reduced to suit the air pollution intensity.

2. Technical data

Model No. TAC-12D-10

Dimensions WxHxD 420 x 1000 x 180 mm

Cooling output @L35/L35

1200 W

Heating output 1000 W

Rated voltage Volt/Hz 220VAC, 50/60Hz

Rated current 3.3 A (Cooling)

4.5 A (Heating)

Temperature range -40°C ~ +55°C

Power consumption 720 W (Cooling)

1000 W (Heating)

Air circuit (External) 570 m

Air circuit (Internal) 450 m

Noise 62dB

Refrigerant R134a

Protection category IP55

Weight 34Kg

Special voltages available on request.