Telco TM09-448 - Setting Area Code; Setting Prefix Code; Setting Auto IP; Setting Dialing Mode

5
 Set area code
When LCD display “SET 2 CODE “, press [SET] and LCD will
display” CODE ---- “. Press [SET] again to edit the area code
number. Choose the wanted number by pressing [UP]/[DOWN] and
press [SET] to confirm.
 Set Prefix code
When LCD display “SET 3 PCODE “, press [SET] and LCD will
display “PCODE -- “. Press [SET] again to edit the area code
number. Choose the wanted number by pressing [UP]/[DOWN] and
press [SET] to confirm.
 Set auto IP
When LCD display “SET 4 AUTO IP”, press [SET] and LCD will
display “AUTO IP OFF “. Enable the auto IP by pressing [UP]/
[DOWN]. And LCD will display “INPUT CODE “. Input the IP code by
digital key.
 Set dialing mode
When LCD display “SET 5 P-T “, press [SET] and LCD will display”
TONE “. Switch the dialing mode by pressing [UP]/ [DOWN].