Need help?Do you have a question about the Tele Radio Tiger T2 and is the answer not in the manual?
Expresses gratitude for the purchase and advises careful reading of instructions.
Clarifies that installation/configuration info is not for the end-user.
Recommends integrating a wired emergency stop for Tele Radio remote control systems.
Advises regular testing of the STOP button functionality, at least every 200 hours.
Provides essential guidelines for the proper installation, connection, and mounting of the equipment.
Outlines user responsibilities and prerequisites for operating the equipment safely.
Details the necessary maintenance procedures and recommendations for the equipment.
Describes the intended application of the Tele Radio AB Tiger remote control systems for lifting/mobile equipment.
Explains how to enable PIN codes for start-up protection to prevent unauthorized use.
Details the automatic software compatibility check between transmitter and receiver.
Explains the operation of the stop button and its role in controlling safety relays.
Describes the zero position check performed during transmitter start-up for safety.
Details the features and specifications of the R00004-05 receiver model.
Warns that only qualified installers should open the receiver, emphasizing power disconnection.
Warns that only qualified installers should open the receiver, emphasizing power disconnection.
Presents detailed technical specifications for both T00009-22 and T00011-24 transmitters.
Provides FCC and IC information relevant to the T00011-24 transmitter and R00004-10 receiver.
Shows the location and details of the product label on the T00011-24 transmitter.
Shows the location and details of the product label on the R00004-10 receiver.
Provides a cross-reference between Tiger unit models and their corresponding radio modules.
Step-by-step instructions for installing the TR304 radio module into a transmitter.
Step-by-step instructions for installing the TR283 radio module into a receiver.
Provides FCC statements regarding RF exposure requirements and antenna separation.
Step-by-step guide to creating and storing up to 10 PIN codes for transmitter authorization.
Instructions on how to erase existing PIN codes from the transmitter.
Describes the process for quickly logging out the transmitter from active receivers.
Instructions for logging out the transmitter from the menu mode.
Details the procedure for registering a transmitter to a receiver.
Step-by-step guide to erase a transmitter from the receiver.
Detailed steps for replacing an existing transmitter with a new one.
Guide to configuring the automatic transmitter shutdown timer to save battery.
Instructions for changing the operating channel on the transmitter.
Details how to switch between momentary and latching functionality for relays.
Lists important safety warnings and precautions for handling and using batteries.
Provides information on battery types, operating time, and charging for the transmitters.
Lists specific conditions and faults that are excluded from the product guarantee/warranty.
Details specific maintenance tasks and recommendations for product care.
General| Brand | Tele Radio |
|---|---|
| Model | Tiger T2 |
| Category | Remote Control |
| Language | English |
To Next Page