Tele Radio Tiger - User Manual

Other manuals for Tele Radio Tiger

Basic Instructions20 pages

Questions and Answers

P
Paula GravesJul 27, 2025
What to do if connection between the first Tele Radio Tiger Transmitter and the receiver is broken because a second- not registered-transmitter is started up on the same radio channel?
- J
  Joseph DavisJul 27, 2025
  If the connection between the first Tele Radio Transmitter and the receiver is broken because a second, unregistered transmitter starts on the same radio channel, the connection should re-establish automatically when the radio signal from the second transmitter stops. Ensure the second transmitter is turned off or switch its channel.
A
angelica81Aug 1, 2025
What to do if connection between the first Tele Radio Tiger Transmitter and the receiver is broken because a second- registered- transmitter is started up on the same radio channel?
- T
  Tricia CruzAug 1, 2025
  If a second, registered Tele Radio Transmitter starts on the same radio channel and breaks the connection between the first transmitter and the receiver, restart the first transmitter. Also, make sure to turn off the second transmitter or switch its channel.
J
Jason GreeneAug 7, 2025
Why Tele Radio Tiger Transmitter range is too short?
- C
  clarkemichaelAug 8, 2025
  The range of your Tele Radio Transmitter might be too short if the antenna or antenna cables are damaged or incorrectly installed, or if someone else is transmitting on the same channel. You can try changing the position of the antenna, replacing the antenna cable, or switching the channel.
K
Kurt BullockAug 13, 2025
What to do if Tele Radio Tiger does not start?
- A
  Amy DavenportAug 14, 2025
  If your Tele Radio Transmitter doesn't start when you press the start buttons simultaneously for about 1 second and then release them, it could be due to several reasons: the battery might be discharged (charge the battery), the hardware may be broken (contact your representative), there may be an error message in the display (contact your representative), or no receiver has been selected (restart and select a receiver before pressing the start buttons).
C
Christopher DownsAug 20, 2025
How to fix no registered transmitters in Tele Radio receiver display list?
- K
  Katherine LynnAug 20, 2025
  If there are no registered transmitters in the Tele Radio receiver display list, it means no transmitter has been registered in the receiver. To resolve this, register the transmitter in the receiver.