The Teleadapt ChargePort Duo (TA-8250) is a versatile charging solution designed for indoor use, offering both Qi wireless charging and wired USB charging capabilities. It is available in two models: TA-8250-B00 (Soft-touch black) and TA-8250-WOO (Soft-touch white), both supplied with a 12V/4A PSU, an adhesive pad, and a mounting bracket.
Function Description:
The ChargePort Duo provides simultaneous charging for multiple devices. It features two Qi-compliant wireless charging pads, each capable of delivering up to 10 watts of power, allowing two devices to be charged wirelessly at the same time. For wired charging, it includes three USB ports: one USB-C port and two USB-A ports. The USB-C port can supply 5V/3A, while each USB-A port can supply 5V/2.4A. These USB ports are designed to power and charge a wide range of devices, including iPhones, iPads, iPods, Android devices, e-readers, and digital cameras.
Important Technical Specifications:
- Input: 12V/4A
- Wireless Charging Output Power: 5W/7.5W/10W (Total: 20W Max.)
- Wireless Charging Working Frequency: 110-205KHz
- Wired Charging (Single Output USB-A or USB-C): 5V3A, 9V2A, 12V1.5A
- Wired Charging (Dual Output USB-A and USB-C): 5V3A (Total 15W Max.)
- Operating Temperature Range: 0~25°C
- Storage Temperature Range: -20 ~ 70°C
- Operating Humidity: 10% ~ 80% RH
- Storage Humidity: 5% ~ 95% RH
- Compliance: CE (EN 55032:2012+AC:2013, EN 55024:2010+A1:2015), FCC (47 CFR FCC Part 15 Subpart B), Qi (EPP, Qi 1.2.4)
Usage Features:
- Qi Wireless Charging:
- Features two Qi-compliant wireless charging pads.
- Each pad supports up to 10 watts of power.
- To charge, place a Qi-certified device on one of the pads and adjust its position until the charging indicator (6) pulses yellow.
- Supports simultaneous wireless charging of two devices.
- Equipped with Foreign Object Detection (FOD) to disable charging and flash a white indicator if metallic objects are detected, preventing potential damage or overheating.
- Includes over-temperature protection; if the temperature is too high, charging will be disabled, and the indicator will flash white until the temperature returns to normal.
- Wired USB Charging:
- One USB-C port (5V/3A).
- Two USB-A ports (5V/2.4A each).
- Supports a wide range of devices.
- Indicators:
- Left and Right Indicators (5) for wireless charging status.
- Upon power-up, both indicators flash and then turn solid white, indicating readiness for use.
- Safety Features:
- Wireless Charging: Over voltage protection, Under voltage protection, Short circuit protection, Over current protection, Over temperature protection, Foreign Object Detection (FOD).
- Wired Charging: Short circuit protection, Over current protection.
Installation and Security Options:
The ChargePort Duo offers flexible installation options to suit various environments:
- Mounting Bracket: The device can be secured using a provided mounting bracket. The DC power connector plugs into the rear of the ChargePort Duo before attaching the bracket to the base with four screws. The bracket also helps retain the DC power cord.
- Lanyard: For additional security, a lanyard can be fixed to the base of the ChargePort Duo with a supplied screw, and the other end secured to furniture or a wall.
- Direct Screw Mounting: The device can also be screwed directly to furniture.
- Adhesive Pad: A double-sided adhesive pad is provided for non-permanent or surface-level installation. Peel the protective paper from one side, affix it to the base of the ChargePort Duo, then peel the other side and carefully place the device in the desired location, applying light downward pressure for good adhesion.
- Power Connection: The device requires a suitable power outlet within 1 meter. An AC power adapter with interchangeable US, EU, UK, and Australia tips is included. The cable from the AC adapter plugs into the DC power connector (3) on the device.
Maintenance Features:
- Cleaning: Clean the device only with a dry cloth.
- Servicing: Refer all servicing to qualified service personnel. Servicing is required if the equipment has been damaged (e.g., damaged power supply, liquid spills, objects fallen into the equipment, exposure to rain/moisture, or if it does not operate normally).
- Environmental Considerations:
- Do NOT install or use near water or expose to rain/moisture.
- Do NOT expose to dripping or splashing; no liquid-filled objects should be placed on the equipment.
- Do NOT place metallic objects on the wireless charging pads.
- Avoid installing near heat sources such as radiators, convection heaters, or other heat-producing apparatus.
- Not suitable for installation in bathrooms.
- Power Disconnection: Unplug the equipment during lightning storms or when unused for long periods.
Important Safety Instructions:
- Read and follow all instructions and heed all warnings.
- Keep instructions for future reference.
- Designed for indoor use only.
- Use only with manufacturer-specified attachments and accessories.
- Ensure the mains adapter is readily accessible.
- Ensure the power cord is uncoiled before installation.
- Only attempt to wirelessly charge Qi-certified devices.
Need help?
General
To Next Page
