Teledyne Analytical Instruments 3110P User Manual

Teledyne Analytical Instruments
OPERATING INSTRUCTIONS FOR
Model 3110P
Portable Percent
Oxygen Analyzer
DANGER
Toxic gases and or flammable liquids may be present in this monitoring system.
Personal protective equipment may be required when servicing this instrument.
Hazardous voltages exist on certain components internally which may persist
for a time even after the power is turned off and disconnected.
Only authorized personnel should conduct maintenance and/or servicing.
Before conducting any maintenance or servicing, consult with authorized
supervisor/manager.
P/N M3110P
4/1515

Use and Disclosure of Data
Information contained herein is classified as EAR99 under the
U.S. Export Administration Regulations.
Export, reexport or diversion contrary to U.S. law is prohibited.

Teledyne Analytical Instruments 3110P Specifications

General

Gas Types Measured	Oxygen (O2)
Accuracy	±1% of Full Scale
Repeatability	±0.5% of Full Scale
Measurement Range	0-100% O2
Operating Temperature	0°C to 50°C (32°F to 122°F)
Output Signal	4-20 mA
Dimensions	5.25" H
Enclosure Rating	NEMA 4X (IP66)