Do you have a question about the Teledyne Analytical Instruments INSTA TRANS-XD and is the answer not in the manual?
Critical hazard warning regarding toxic gases and flammable liquids.
Explains safety alert symbols (Danger, Caution, Technician, Note).
Addresses component substitution, flammable atmospheres, and electrostatic hazards.
Warns about using the instrument with combustible gases in nonhazardous areas.
Details FM and ATEX certification standards and special conditions for safe use.
Lists detailed technical specs like enclosure, power, ranges, accuracy, and temperature.
Steps for installing the micro-fuel cell sensor.
Details span calibration and 4-20 mA adjustment.
| Response Time | T90 < 30 seconds |
|---|---|
| Enclosure Rating | NEMA 4X / IP66 |
| Mounting | Wall Mount |
| Measurement Principle | Electrochemical |
| Measurement Range | 0-25% O2 |
| Accuracy | ±2% of full scale |
| Outputs | 4-20 mA, RS-485 |
| Power Supply | 24 VDC |
| Operating Temperature | -20 to 50°C |
| Gases | Oxygen |
| Application | Industrial gas detection and monitoring |
Loading...