Power Products Guide
Appendix A Power Product Part Numbers
A-2
Table A-1 Power Product Part Numbers and Compatibility
Product Power/Usage Part Number
934 Nickel-Cadmium Battery 12 V, 4 Ah, not recommended for 4100 series 60-1684-040
946 Lead-Acid Battery 12 V, 6.5 Ah 60-3004-106
947 Lead-Acid Battery
12 V, 6.5 Ah 4100 only 60-3114-011
948 Lead-Acid Battery 12 V, 45 Ah 68-3000-948
Alkaline Lantern Battery
(Energizer Model 529
a
)
6 V for 4100 and 2100 modules 340-2006-02
945 Rechargeable Lead-Acid
Lantern Battery
6 V for2191EX Zone 0 battery module and 2151 module
only
60-2004-041
LTC2191EX Lithium Battery Pack for 2191EX Zone 0 battery module only
b
68-2000-022
SLA2191EX Rechargeable
Lead-Acid Battery Pack
for 2191EX Zone 0 battery module only
a
68-2000-023
913 High Capacity Power Pack 120 V, charges 934 ni-cad 60-1684-088
923 High Capacity Power Pack 230 V, charges 934 ni-cad 60-3004-190
914 Battery Backed Power Pack 120 V, no charger 68-3004-130
924 Battery Backed Power Pack 240 V, no charger 68-3004-160
Solar Panel Battery Charger 10 W, charges 946, 947, and 948 lead-acid 60-5314-478
Solar Panel Battery Charger OEM 40 W, for deep-cycle user-supplied lead-acid 60-5314-347
Solar Panel Battery Charger 110 W, for user-supplied deep-cycle or marine lead-acid 60-5314-629
961 Wall Charger for 934 ni-cad 60-3004-059
963 Desktop Charger 120/230 V, for 946 and 947 lead-acid 68-3004-198
965 Five-Station Battery Charger For Isco lead-acid and ni-cad, w/ 120VAC power cord 68-3000-965
965 Five-Station Battery Charger For Isco lead-acid and ni-cad, w/ 240VAC power cord 68-3000-966
Automatic Battery Charger 12 V, 6 A, for 948 battery only 341-0118-12
PowerSonic battery charger Float voltage, 2A, for 2196EX only 68-2000-044
SV2191SLA Charger US linecord, for SLA2191EX only 68-2000-025
SV2191SLA Charger EU linecord, for SLA2191EX only 68-2000-024
a. Due to a significantly shorter battery life, the Energizer Model EN529 is not recommended for use
with Isco equipment.
b. To avoid overloading the fuses in the LTC2191EX lithium battery packs, disconnect the flow mod-
ule(s) before installing or replacing the lithium battery packs. The SLA2191EX lead-acid battery
packs do not contain fuses, and do not require that the flow module(s) be disconnected.
To Next Page
Loading...