Teledyne FLIR - Page 2

Teledyne FLIR
Infrared Camera OEM
2
Equipment described herein is subject to US export regulations and may require a license prior to export. Diversion contrary to US law is prohibited.
Imagery for illustration purposes only. Specications are subject to change without notice. Rev. 100.
© 2021 Teledyne FLIR LLC. Approved for public release. Teledyne FLIR Approved [FLIRGTC-SBA-005]. All rights reserved.
The following items are required, but included in the CanaKit Raspberry Pi GPIO Breakout Board
Bundle:
• D. Breadboard
• E. Wires
• F. CanaKit GPIO Breakout Board
• G. Ribbon Cable
Setting up the breadboard
1 Take out the Canakit GPIO Breakout Board and it’s ribbon cable from it’s plastic bag and remove it
from pink foam.