Need help?Do you have a question about the Teledyne FLIR A50 Series and is the answer not in the manual?
General| Frame Rate | 30 Hz |
|---|---|
| Video Output | GigE Vision, GenICam |
| Sensor Type | Uncooled microbolometer |
| Resolution | 464 x 348 pixels |
| Accuracy | ±2 °C or ±2% of reading |
| Power Supply | PoE (Power over Ethernet) |
| Video Streaming | Yes |
| Operating Temperature | -15°C to +50°C |
| Storage Temperature | -40 °C to 70 °C (-40 °F to 158 °F) |
| Focus | Motorized or manual |
| Lens Options | 13 mm |
| Spectral Range | 7.5 µm |
General warranty terms and legal disclaimers.
Product compliance with US export regulations and patent information.
Details on quality system and third-party license info.
Policy on usage statistics and copyright notice.
FCC/IC compliance, RF exposure limits, and modification warnings.
Warnings about energy sources, temperature limits, and hot surfaces.
Caution against solvents and reference to cleaning section.
Precautions for cleaning the infrared lens and its coating.
Cautions for compressed air quality and automatic shutter operation.
How to register your camera for benefits and warranty.
Annual calibration needs and tips for accurate measurements.
Guidelines for EEE disposal and training resources.
Where to find the latest manuals and notifications.
Notes on manual scope and authoritative English version.
How to contact the customer support center for assistance.
Information required for submitting a support question.
List of resources available for download from the support site.
Overview of camera capabilities and typical applications.
System overview for early fire detection.
System overview for quality assurance applications.
System overview for 24/7 condition monitoring.
System overview for R&D applications.
Identification of rear connectors and indicators.
Identification of front-mounted infrared sensor and visual camera.
Setting up the camera on a network using FLIR IP Config software.
Steps for connecting power and network cables to the camera.
Logging in and configuring the camera via its web interface.
Recommendations for mounting and managing heat dissipation.
Available URLs, encoding, and source options for RTSP streams.
Compatible browsers and how to log into the web interface.
Overview of the web interface layout and its main sections.
Explanation of interface tabs, live image display, and toolbar options.
Introduction to measurement tools and how to use the Spot tool.
How to use Box and Measurement Mask tools for image analysis.
How to add and configure Line and Polyline measurement tools.
Using Delta and Reference Temperature measurement tools.
Setting up alarms triggered by measurement results.
Configuring alarms triggered by measurement results.
Setting alarms based on digital input or internal sensor temperature.
Adjusting emissivity, distance, and other object parameters.
Configuring global and local measurement parameters.
Selecting and understanding different image modes.
Using FSX enhancement and selecting image modes.
Applying color palettes and isotherms for image analysis.
Detailed configuration of isotherm alarms.
Adjusting image regions and performing camera calibration.
Setting up automatic and manual calibration procedures.
Aligning MSX images and selecting temperature ranges.
Adjusting temperature scale and flipping the image.
Viewing in full screen, saving snapshots, and pausing the stream.
Managing overlay graphics, filters, and camera presets.
How to save and load camera configuration presets.
Configuring firewall, SSL certificates, and enabling/disabling services.
Configuring web protocols, users, and regional preferences.
Configuring network parameters like IP, wireless, and streaming bit rate.
Procedures for restarting, factory resetting, and upgrading firmware.
Configuring SNMP, multicast, and general settings.
Configuring email or FTP notifications for alarms.
Scheduling automated actions like email or FTP notifications.
Setting up MQTT for publish/subscribe messaging.
Configuring digital and analog outputs via Modbus.
Viewing, downloading, and deleting images and videos.
Enabling, downloading, and clearing log files.
Pinout and wiring for the Ethernet connector and cable.
Pinout details for the Power/Digital I/O connector.
Description of the A-series connection board accessory.
Examples of connecting to the A-series connection board.
How the LED and reset button function based on press duration.
Indicator LED status for power modes and Ethernet connection.
Recommended liquids and procedure for cleaning camera parts.
Recommended liquids and procedure for cleaning the infrared lens.
Importance and common misunderstandings of calibration.
Formal definition and expression of calibration.
How FLIR Systems performs camera calibration.
Comparing user vs. FLIR calibration processes.
Clarifying the terms calibration, verification, and adjustment.
Explanation of NUC process for image correction.
Adjusting thermal contrast and brightness for specific details.
Historical patent documents related to FLIR technology.
FLIR's commitment to complete infrared solutions.
Information on the Infrared Training Center (ITC).
Overview of FLIR's global service network for customer support.
To Next Page
