Teledyne T640 Standard Operating Procedure

STATEWIDE
STANDARD OPERATING
PROCEDURE
FOR
TELEDYNE T640 PM
2.5
PARTICULATE MONITOR
STATE OF FLORIDA
DEPARTMENT OF ENVIRONMENTAL PROTECTION
OFFICE OF AIR MONITORING
Prepared by: Florida PQAO Date: 11/6/2017
Approved by: _____________________________ Date: _______________________
Quality Assurance Manager
Approved by: _____________________________ Date: _______________________
EPA Region IV Approval Officer
Document History

Teledyne T640 Specifications

General

Operating Temperature	-30°C to +50°C
Power Requirements	100-240 VAC, 50/60 Hz
Weight	5.5 kg
Resolution	0.1 µg/m³
Flow Rate	16.67 L/min
Display Type	LCD
Range	0-1000 µg/m³
Linearity	±1% of reading
Operating Humidity	0-95% RH, non-condensing
Data Logging	Yes
Measurement Range	0-1000 µg/m³
Communication Interface	Ethernet
Data Storage	Internal
Input Ports	Ethernet, USB, Serial