English - 27 -
•
Thelocationwherethetransmissionismosteffective
differsdependingontheusageenvironment.
• TheWirelessfeatureoftheTVsupports802.11a,b,g
& n type modems. It is highly recommended that
youshouldusetheIEEE 802.11n communication
protocolinordertoavoidanypossibleproblems
whilewatchingvideos.
• You must change your modem’s SSID when there
areanyothermodemsaroundwiththesameSSID.
Youcanencounterconnectionproblemsotherwise.
Useawiredconnectionifyouexperienceproblems
withawirelessconnection.
Configuring Wireless Device Settings
Open the Network menu and select Network Type as
tostartconnectionprocess.
Highlightoptionandpress
OKtostartasearchforavailablewirelessnetworks.
Allfoundnetworkswillbelisted.Highlightyourdesired
network fromthelistandpressOK to connect. A
network with hidden SSID can not be detected by
other devices. If you want to connect to a network with
hidden SSID, scroll down the list of detected wireless
networks, highlight the Add New Network option and
press OK. Enter the name of the network and select
the security type using the related options to connect.
Note: If the modem supports N mode, you should set N
mode settings.
Iftheselectednetworkispassword-protected,enter
thecorrectkeybyusingthevirtualkeyboard.Youcan
usethiskeyboardviathedirectionalbuttonsandthe
OK button on the remote control.
WaituntiltheIPaddressisshownonthescreen.
Thismeansthattheconnectionisnowestablished.
Todisconnectfromawirelessnetwork,highlight
Network Type andpressLeftorRightbuttonstoset
as .
If your router has WPS, you can directly connect to the
modem/router without entering a password or adding
the network first. Highlight Press WPS on your wifi
router option and press OK. Go to your modem/router
device and press the WPS button on it to make the
connection. You will see a connection confirmation on
your TV once the devices have paired. Select OK to
proceed. No further configuration is required.
HighlightInternet Speed Test and press the OK button
to check yourinternetconnectionspeed.Highlight
Advanced and press the OK button to
opentheadvancedsettingmenu.Usedirectionaland
numericbuttonstoset.HighlightSave and press the
OKbuttontosavesettingswhencomplete.
The status of the connection will be displayed as
Connected or Not Connected and the current IP
address,ifaconnectionisestablished.
WLAN
•
Ifyour mobiledevice hasWLAN feature, you can
connectittoyourTVviaarouter,inordertoaccess
the content in your device. For this, your mobile
devicemusthaveanappropriatesharingsoftware.
ConnectyourTVtoyourrouterfollowingthesteps
mentionedinthesectionsabove.
Afterwards,connectyourmobiledevicetotherouter
andthenactivatethesharingsoftwareonyourmobile
device.Then,selectfilesthatyouwanttosharewith
your TV.
If the connection is established correctly, you will
beabletoaccessthesharedfilesinstalledonyour
mobiledeviceviatheAudioVideoSharingfeature
of your TV.
Highlight the option in the
Sources menu and press OK,availablemediaserver
devicesinthenetworkwillbedisplayed.Selectyour
mobiledeviceandpresstheOK buttontocontinue.
• If available, you can download a virtual remote
controller application from the server of your mobile
device application provider.
Note: This feature may not be supported on all mobile
devices.
Wake ON
Wake-on-LAN (WoL) and Wake-on-Wireless LAN
(WoWLAN) are standards that allow a device to be
turned on or woken up by a network message. The
message is sent to the device by a program executed
on a remote device connected to the same local area
network, such as a smartphone.
Your TV is WoL and WoWLAN compatible. This feature
might be disabled during the First Time Installation
process. To enable this feature set the Wake On option
in the Network menu as On. It is necessary that both
the device, from which the network message will be
sent to the TV, and the TV are connected to the same
network. Wake On feature is only supported for Android
OS devices and can only be used via YouTube and
Netflix applications.
In order to use this feature the TV and the remote
device should be connected at least once while the
TV is on. If the TV is powered off, the connection
should be re-established, the next time it is switched
on. Otherwise this feature will be unavailable. This
does not apply, when the TV is switched into the
standby mode.
The performance of some devices in the market, may
vary due to the software architecture. In order to use
Wake On feature with a better performance, please
make sure that your device has latest firmware version.
If you want your TV to consume less power in standby
mode, you can disable this feature by setting the Wake
On option as Off.
To Next Page
Loading...
