To Next PageTo Next Page
Need help?Do you have a question about the Telefunken TEALCE-12CHSA and is the answer not in the manual?
General| Power Supply | 220-240V, 50Hz |
|---|---|
| Refrigerant | R410A |
| Weight (Outdoor Unit) | 28 kg |
| Cooling Capacity | 12000 BTU |
| Type | Split System |
| Operating Temperature (Cooling) | 18-43°C |
Identifies and lists all components of the indoor unit with corresponding numbers.
Identifies and lists all components of the outdoor unit with corresponding numbers.
Explains how the unit automatically restarts after power failure and how to deactivate it.
Details manual operation via the emergency button for cooling and heating.
Describes the buttons and functions of the remote control for operating the air conditioner.
Explains the meaning of various symbols shown on the liquid crystal display of the remote controller.
Guides on replacing remote controller batteries, proper usage, placement, and DIP switch settings.
Details how to control the direction of airflow using the SWING function.
Explains how to activate and optimize the cooling and heating modes of the air conditioner.
Guides on setting timers and using fan-only and dry modes for operation.
Explains automatic 'FEEL' mode and 'SLEEP' mode for enhanced comfort.
Details custom setting 'I SET' and automatic 'Self-Clean' features.
Provides recommended room and outdoor temperatures for optimal performance.
Detailed steps for securely installing the mounting plate for the indoor unit.
Instructions on how to drill a properly sloped hole for piping and wiring.
Guides on making the necessary electrical connections for the indoor unit.
Steps for connecting the refrigerant pipes, including bending and tightening procedures.
Details on making connections to the indoor unit, including flaring nuts and tightening.
Essential steps for correctly installing the drain hose for effective condensed water removal.
Steps to finalize the indoor unit installation, including lagging pipes and securing the unit.
Checks to verify normal operation of the indoor unit's functions and indicators.
Checks to ensure the outdoor unit operates without abnormal noise or vibration.
Steps for making the correct electrical connections to the outdoor unit.
Guidelines for securely connecting refrigerant pipes to the outdoor unit, avoiding leaks.
Procedure for removing air and humidity from the refrigerant circuit using a vacuum pump.
How to check refrigerant pressure ranges for R290 and R32 to detect abnormalities.
Detailed steps for vacuum pump operation to remove air and humidity from the system.
Instructions for conducting operational tests on the indoor and outdoor units after installation.
Table showing pipe length, distance, and refrigerant charge based on unit capacity.
Specifies the correct tightening torque values for various pipe sizes and connections.
Steps for cleaning the antidust filters and electrostatic/deodorant filters of the indoor unit.
Instructions on how to clean the heat exchanger of both indoor and outdoor units.
Tasks to perform at the end of the season, including disconnecting power and cleaning.
Guidance on when and how to replace batteries in the remote controller.
A table detailing common appliance malfunctions and their potential causes.
Explains error codes displayed on the indoor unit and their corresponding issues.
