Telefunken TKVCL3 - User Manual

Questions and Answers

M
Michael RogersAug 13, 2025
Why is my Telefunken TKVCL3 Air Conditioner not working?
- R
  riddleamyAug 13, 2025
  If your Telefunken Air Conditioner isn't working, several factors could be the cause. First, ensure the unit is properly plugged in and that there is electricity. If those aren't the issue, it could be due to a 3-minute timing cycle in progress—simply wait for it to complete. Alternatively, the selected temperature might be too close to the room temperature; in this case, select a bigger temperature gap. Finally, if the room temperature is below 16°C, it's recommended to stop using the air conditioner.
P
pwilsonAug 16, 2025
How to improve performance of Telefunken TKVCL3 Air Conditioner?
- J
  jeffrey11Aug 16, 2025
  If your Telefunken Air Conditioner is showing bad performance, it might be caused by a dirty air filter. Clean the air filter to resolve this. Another potential cause is blocked air inlets or outlets; remove any objects obstructing the unit or consider changing its location. Finally, incorrect programming could be the issue; try switching off the appliance and restarting the settings.
K
Kenneth HoffmanAug 20, 2025
Why is my Telefunken TKVCL3 so noisy?
- W
  Wesley ParkAug 20, 2025
  If your Telefunken Air Conditioner is too noisy, it could be due to the unit not being placed on a stable and flat surface. Placing it on a stable, flat surface may resolve the issue. Another cause could be a damaged air filter, which would require changing the air filter.
J
Joshua BakerAug 25, 2025
What to do if Telefunken TKVCL3 Air Conditioner remote control is not working?
- C
  Chris FarrellAug 25, 2025
  If the remote control for your Telefunken Air Conditioner isn't working, first ensure you are close enough to the unit. If the issue persists, the batteries may be dead; try changing the batteries.
T
Tamara MurphyAug 28, 2025
What does P2 mean on Telefunken TKVCL3?
- F
  Fred AndrewsAug 28, 2025
  If 'P2' is displayed on the LCD of your Telefunken Air Conditioner, it indicates that the water tank is full. You should start the water draining operation.
M
Matthew FrenchSep 1, 2025
What does E1 mean on Telefunken TKVCL3 Air Conditioner?
- X
  xbarnesSep 1, 2025
  If 'E1' is displayed on the LCD of your Telefunken Air Conditioner, it means the unit is overheating in heating mode. Switch off the unit and allow it to cool down for 1 hour.
J
Jacqueline RamosSep 4, 2025
What does E4 mean on Telefunken TKVCL3 Air Conditioner?
- C
  Charles OrtegaSep 4, 2025
  If 'E4' is displayed on the LCD of your Telefunken Air Conditioner, it indicates anti-freeze protection is active. Wait until the anti-freeze process finishes.
V
Veronica BennettSep 8, 2025
What does E2 mean on Telefunken TKVCL3?
- V
  Veronica LeeSep 8, 2025
  If 'E2' is displayed on the LCD of your Telefunken Air Conditioner, it indicates that the room temperature is too high or too low. In this case, you should switch off the appliance.