Why is my Telefunken TF-9820T2HD remote control not working?
If your Telefunken TV Receiver's remote control isn't working, first, ensure the set-top box isn't in standby mode by pressing the standby button. Then, make sure nothing is blocking the front panel and that you're aiming the remote correctly. Finally, try changing the batteries.
What to do if my Telefunken TV Receiver has no picture or sound?
If you're getting no picture or sound on your Telefunken TV Receiver, the issue could be a weak or absent signal. Check both the signal cable and the A/V HDMI connectors to ensure they are properly connected.
Why does my Telefunken TF-9820T2HD have video but no audio over HDMI?
If the video is fine through the HDMI output but the audio isn't working on your Telefunken TV Receiver, it might be due to a problem with the HDMI line. Try unplugging and plugging in both the TV and the set-top box at the same time.
How to fix a Telefunken TF-9820T2HD when the standby LED is not lit?
If the standby LED on your Telefunken TV Receiver isn't lit, it could be due to the adaptor cable not being properly connected. Check to ensure the adaptor cable is securely plugged into the power socket.
Why are my settings not saving on my Telefunken TF-9820T2HD TV Receiver?
To ensure settings are saved on your Telefunken TV Receiver, always allow the digital set-top box to enter standby mode before unplugging it. If you unplug the box without doing so, your settings may not be saved.
General| Brand | Telefunken |
|---|---|
| Model | TF-9820T2HD |
| Category | TV Receiver |
| Language | English |
Lists DVB, HDMI, USB, frequency range, video/audio decoding, and power consumption.
Guidelines for using AC adaptor, power source, and power cord safely.
Advice on ventilation, humidity, dust, and heat sources.
Warning against liquid contact and explanation of electrical hazard symbols.
Details on product markings like Class II, Earth, Hazardous Live Terminal.
Warning about chemical burn hazard from ingested batteries.
Detailed explanation of each button on the remote control.
Identifies ports on the front (USB) and rear (Antenna, HDMI, A/V, etc.).
Explains connecting via SCART or HDMI for picture quality.
Instructions for connecting the 12V DC adaptor to mains power.
How to turn the unit on/off and its auto power-down feature.
Illustrates connecting an antenna to the ANTENNA IN port.
How to connect USB drives, supported formats, and handling cautions.
Steps for initial setup including aerial connection and channel search.
Solutions for no picture/sound, settings problems, and remote control issues.
To Next Page