English - 28 -
Digital buttons (Skip): Go straight to your favourite
channel by using digital buttons.
OK : After selecting a program, if you press the OK
button, you access the following functions : View
channel, Store, and / or Reserve the selected
program.
Text (Search): Displays the EPG search menu.
(Search guide).
(Info) : Displays information related to on-
goingprograms.
(RECORDING): The television starts to record
the selected program. You can press again to stop
recording.
P+P-: More info on the events
IMPORTANT : Connect your USB device only when your
television is turned off. Then turn on the TV set in order to
enable the record function.
Note: During recording,it is not possible to change the
channel or Source.
Note: It is impossible to record two channels at the same time.
Software update
Your television can, through the antenna or cable, search
and provide updates.
Software update search via the user
interface
Simply go through the main menu. Choose Settings
and select other settings menu. In the Other
settingsmenu, select Software update and press
the OK button to open the Update options menu.
3 Search and update mode
When the TV set receives signal from the antenna. If
the Automatic search option in the Update options
menu is active, the television automatically turns on
at 3:00 a.m. and launches the search for broadcasting
channels in order to update the new software. If new
software is found and downloaded successfully,
the television begins to work with the new software
version when next it is turned on.
Note: If the television does not come on after the update,
disconnect it for two minutes, then connect it again.
Troubleshooting and tips
The TV is not coming on
Check to ensure that the electricity plug is safely
connected to the wall socket or that the batteries of
the remote control are functional.
Poor picture quality
• Check if your antenna is properly connected. A poor
signal level can negatively affect image quality.
• If you carried out manual settings, verify that you
entered the right channel frequency.
• Image quality may be affected negatively when two
devices are connected to the television set at the
same time. If such is the case, disconnect one of
the devices.
No image
• No image indicates that your TV is not receiving a
signal. Have you selected the correct buttons on the
remote control? Try once more. Also make sure that
you have selected the right input source.
• Is the antenna connected properly?
• Is the antenna cable damaged?
• Are suitable plugs used to connect the antenna?
• If you are not sure , please consult your supplier.
No sound
• Has the mute button been pressed? If that is the
case, press the " " button, or increase the volume.
• Only one speaker is producing sound. Is the balance
well placed in the middle? Consult the Sound menu.
The remote control is not working
• The batteries may be down. Replace the batteries.
Input sources cannot be selected.
• If you cannot select an input source, it is possible
that no device is connected.
• Check the AV cables and connections if you have
tried to connect a device.
Recording not available
To record a programme, you rst have to connect
your USB device to your television which you have
to shut down rst. Then turn on the TV set in order
to enable the record function. If you are unable to
record, try turning off the television and inserting the
USB device again.
The USB device is too slow
If the message "USB too slow" appears on the screen
at the start of a recording, try starting the recording
again. If the same error message appears, it is
possible that your USB device does not have the
required speed. Try to connect another USB device.
Teletext
Press the button to enter teletext mode. Press again to
enable the Mix mode. Press one more time to exit. Follow
the instructions displayed on the digital teletext screen.
Digital teletext (United Kingdom only)
Press on the button to display information related
to the digital teletext. Use the coloured buttons, the
cursor buttons and the OK button to adjust. The operating
method may differ, depending on the content of the digital
teletext. Follow the instructions displayed on the digital
teletext screen. When the button is pressed, TV
switches back to television broadcast.
To Next Page
Loading...
Need help?
General
