Telefunken TTL-700 - User Manual

Questions and Answers

K
Katrina HughesJul 30, 2025
Why is my Telefunken Washer not spinning and showing error E3?
- M
  Mr. Clayton RayJul 30, 2025
  If your Telefunken Washer displays 'E3' and the spinning function isn't working after two attempts, it indicates the safety switch has been activated. This could be due to the laundry being unevenly distributed or the machine not being level. To resolve this, re-order the laundries inside the washer, ensure the machine is on a level surface, and then close and reopen the top lid.
M
Michael VillegasAug 5, 2025
What to do if my Telefunken Washer is not filling with water and shows error E4?
- M
  Mrs. Heather AlexanderAug 5, 2025
  If your Telefunken Washer is not filling with water, or the water level isn't reached within 15 minutes, and the display shows 'E4', the issue might be with the water supply. Ensure the water faucet is fully open and that there is no water supply failure. Also, the water inlet valve might be blocked. If so, clean the water inlet valve. After any of these steps, open and close the top lid once.
D
Dr. Edward CobbAug 11, 2025
How to fix draining issues on my Telefunken TTL-700 Washer (error E1)?
- D
  Daniel BradyAug 11, 2025
  If your Telefunken Washer isn't draining properly or the draining speed is too slow, and the digital tube displays 'E1' while ringing, there might be a blockage in the drain hose. Check if the drain hose is blocked by any foreign material and clean it. Also, inspect the drain hose for freezing. If frozen, clean the frozen material. Opening and closing the top lid once may also help. If the pump has been running for a long time in hot weather, the power may cut off automatically for safety; the machine will resume working after some minutes.
W
William WestAug 17, 2025
What to do if my Telefunken TTL-700 Washer stops mid-cycle with error E2?
- B
  Benjamin RushAug 17, 2025
  If your Telefunken Washer stops running (except for water filling and draining) and the digital tube displays 'E2' while ringing, it indicates that the top lid is not closed properly. Ensure the top lid is securely closed.
L
Levi HowardAug 23, 2025
Why does my Telefunken Washer show error E0 after starting a reservation?
- T
  Tanya KelleyAug 23, 2025
  If your Telefunken Washer rings and the digital tube displays 'E0' after the reservation is started, it means the top lid is not closed. Make sure to close the top lid.