Telemark TVP-2000 - Page 37

Page 37 of 37
TVP Manual (full) March 2007 CE rev 03.doc
2.31 Commands available when using RS232 control
NOTE
All commands must be executed as lower case characters followed by return. All commands
apart from the specialised calibration routine follow a three-character format.
W2o
Turns the comms link on
W2f
Turns the link off
Operational commands
>Write Commands ‘w’
>------------------------------
>w2o – write 232 control ON
>w2f – write 232 control OFF
>wso – write System ON
>wsf – write System OFF
>wss – write Standby 1
>w2s – write Standby 2
>wsc – write Cool 1
>ws2c – write Cool 2
>wsd – write Defrost 1
>w2d – write Defrost 2