Need help?Do you have a question about the Teleport 10 and is the answer not in the manual?
Extreme danger of permanent blindness from looking at the sun.
Instructions for lifting the telescope to avoid back injury.
Guidelines for handling the telescope with care and control.
Step-by-step guide for removing the telescope from its box.
Instructions for taking off and folding the protective cover.
Instructions for putting the protective cover back on.
Procedure to unlock the primary mirror for first-time use.
How to adjust the mirror sling for proper movement.
Detailed steps for removing the top plate safely and correctly.
Procedure for extending and securing the telescope struts.
Helpful advice for ensuring proper strut extension and alignment.
Steps to safely lower the secondary cage before closing.
Instructions for reattaching the top plate correctly.
Steps for collimating using a laser tool.
Information on using sight tubes and Cheshire eyepieces.
How opening procedures affect collimation and vice-versa.
How to attach the finder to the telescope.
Adjusting power and brightness for optimal use.
Setting the pulsing mode for the finder's illumination.
Techniques for locating celestial objects using the finder.
Steps to align the finder with the main telescope.
Proper storage and battery replacement for the finder.
Review of recommended Pentax XL eyepieces and their attributes.
Securing eyepieces in the focuser for stable viewing.
Balancing and using different types of eyepieces.
Adjusting focal plane for specific eyepiece sets.
Ensuring a stable foundation and thermal equilibrium for viewing.
How seeing and light pollution affect observations.
Adapting magnification and techniques to current conditions.
Tips for beginning with lower power and following objects.
List of suggested books for amateur astronomy.
Overview of the power supply and battery requirements.
Step-by-step guide for replacing batteries.
How and when to use the mirror fan for temperature control.
Using heaters to prevent dew formation on optics.
Procedure for safely cleaning the main mirror.
Procedure for safely cleaning the secondary mirror.
Cleaning non-optical surfaces and checking fasteners.
Periodically checking all fasteners for proper tightness.
Adjusting strut clamp knobs for proper tightness and angle.
Adjusting strut length for focal plane compatibility.
To Next Page
General