Need help?Do you have a question about the TELETRONIX LA-2A and is the answer not in the manual?
Overview of the LA-2A Leveling Amplifier's automatic peak reduction function.
Lists detailed technical parameters including gain, distortion, response, and input/output levels.
Guidance on setting gain and peak reduction controls for optimal performance.
Explanation of the VU meter's functions for output level and gain reduction.
Instructions for connecting two LA-2A units for stereo and synchronized gain reduction.
Procedure to change the unit's power input from 115V to 230V.
General| Gain | 40 dB |
|---|---|
| Type | Optical Compressor |
| Gain Reduction | Up to 40 dB |
| Frequency Response | 30 Hz to 15 kHz, ±1 dB |
| Output Impedance | 600 Ω |
| THD | Less than 0.5% at 1 kHz |
| Release Time | 0.5 to 5 seconds for complete release |
| Vacuum Tubes | 12AX7, 12BH7 |
| Power Requirements | 120 VAC, 50/60 Hz |
| Dimensions | 19 x 3.5 x 7 inches |
| Input Impedance | 600 Ohms (balanced) |
To Next Page
