3 GENERAL PRODUCT DESCRIPTION
3.1 Overview
The aim of this document is to present the possible and recommended hardware
solutions useful for developing a product with the Telit FN990 Family M.2 module.
FN990 Family is Telit’s platform for the M.2 module for applications, such as M2M
applications and industrial IoT device platforms, based on the following technologies:
•
5G sub-6 / 4G / 3G networks for data communication
•
Designed for industrial-grade quality
Front-end for mobile products, offering mobile communication features to an external
host CPU through its rich interfaces.
FN990 Family is available in hardware variants as listed in the APPLICABILITY TABLE.
The designated RF band set for each variant is detailed in Section Frequency Bands and
CA / EN-DC Combinations
3.2 Frequency Bands and CA / EN-DC Combinations
Frequency Bands
Operating frequencies in 5G, LTE, and WCDMA modes conform to 3GPP specifications.
The table below lists the FN990 operating frequencies on 5G, LTE, and WCDMA modes.
5G NR Sub-6 Bands Supportive
Table 2: 5G NR Sub-6 Bands supportive
To Next Page
Loading...
Need help?
General