Need help?Do you have a question about the Telit Wireless Solutions LE910C1-NF and is the answer not in the manual?
General| Category | PCI Card |
|---|---|
| Manufacturer | Telit Wireless Solutions |
| Model | LE910C1-NF |
| Cellular Technology | LTE Cat 1 |
| Data Rate (Max Download) | 10 Mbps |
| Data Rate (Max Upload) | 5 Mbps |
| Operating Voltage | 3.3 V |
| Operating Temperature | -40°C to +85°C |
| GNSS | GPS, GLONASS |
| LTE Bands | B1, B2, B3, B4, B5, B7, B8, B12, B13, B20, B25, B26, B28 |
| 3G Bands | B1, B2, B5, B8 |
| Interfaces | USB 2.0, UART, GPIO |
| Dimensions | 30 mm x 50 mm |
| Interface | Mini PCIe |
| Power Supply | 3.3V |
| Certifications | FCC, PTCRB, GCF |
Details supported frequency bands and critical RF performance metrics.
Detailed pin assignments for USB, UART, SPI, I2C, SD/MMC, and other interfaces.
Identifies essential signals for connection and the LGA pad layout.
Defines critical voltage, current, and temperature limits for safe operation.
Specifies logic levels for GPIOs, SD Card, and SIM Card interfaces.
Details the procedure for powering up the module and its initialization states.
Explains software and hardware methods for safely powering down the module.
Outlines voltage needs, ripple limits, and typical current draw in various modes.
Details FCC, ISED, and other North American regulatory requirements.
To Next Page
