Tell Manufacturing | A Division of Spectrum Brands Inc.Tell Manufacturing | A Division of Spectrum Brands Inc.
4 1
1-800-433-4047 | TEL035002-CL600-110320
MANY CODES TO CHOOSE FROM
The CL600 range has been designed so the code can be
changed on the door in seconds. The code chamber (models
600, 610 and 620) consists of 13 buttons and a ‘C’ button which
is used to re-set (clear)the code chamber after an incorrect
entry, and must always be used as the rst digit of a code.
Buttons may only be used ONCE in a code. For example C1212
is NOT possible.
The CL600 ranges code or combination, can be entered in any order or sequence; eg C1234 can be
C4321 or C1342 or whatever sequence is most convenient to remember.
With 13 buttons, a total of 8,191 different codes are available, any of which can be entered in any
sequence.
The total is arrived at as follows:
Note: Most people will set the code in the range of 4 to 7 digits, and the total number of codes in this range
is 5,434. The lock is supplied with a random factory set code (see code card inside box). At any time
this can be quickly changed to a new code of your choice. Typically codes are 4 to 7 digits long.
Shorter codes are possible (1-2 digits) but are not recommended.
Access Under Control – The Simple and Easy Way
CODE CHANGE GUIDE
CL600 MECHANICAL LOCK
DIMENSIONS
Features
• On door code change in seconds.
• Inside handle always retracts the latch for exit.
• Weather resistant.
• Tamper resistant, with stainless steel buttons,
and clutch protection if the outside handle is
forced.
• Reversible handles.
• Easy code change as often as required.
• Fits doors between 1 3⁄8” (35mm) and 2 3⁄8”
(60mm) thick without modication.
Maintenance
No maintenance of the working parts is
necessary. DO NOT OIL. To maintain the nish
the lock should be cleaned regularly with a soft
cloth. A silicone spray or similar should be used
to provide a protective lm against grit and grime.
To Next Page
Need help?
General
