Need help?Do you have a question about the Tellabs 7100 and is the answer not in the manual?
Overview of metro DWDM systems, scalable architecture, and multiservice delivery.
Lists supported 44- and 88-channel network configurations including SBOADM and OLA.
New control plane features including flexible path protection and dynamic re-route.
Details improvements in packet support, including MPLS LAG and IGMP snooping.
Describes new hardware features in FP5.1.x, including amplifier modules.
Provides server/client management structure for 7100/7100N OTS network.
Graphical user interface for turn-up, provisioning, and maintenance.
Provides primary non-volatile local backup and secondary external server backup.
Supports in-service upgrades that do not impact system traffic.
Continuously monitors signals and system conditions, reporting failures.
Assists in identifying root causes of alarms affecting a circuit.
Offers configurable security profiles for users and NE access control.
Provides functions for provisioning, administration, and maintenance of NEs.
Discovers circuits on the OCH layer, including resource lists and entities.
Provisions circuits on the optical layer and completes via circuit discovery.
Describes features that support system performance monitoring.
Monitors PM on circuit paths supported by multiple NEs and isolates trouble areas.
Provides dynamic call provisioning across the data transport network.
Circular topology connecting NEs to form an unbroken ring for signal paths.
Feature-rich, eight-channel system for metro networks with smaller footprint.
Grid-type topology connected by fiber spans for alternate paths and protection.
Eliminates connections between modules, providing a direct path.
Describes hardware configurations supported on Tellabs 7100 OTS/7100N OTS.
Details module installation in main shelves for SBOADM configurations.
Describes optical line amplifier applications in the main shelf.
Describes port shelf layouts for Tellabs 7100 OTS and Tellabs 7100N OTS.
Shows SBOADM/ROADM configured for port-side protection.
Shows SBOADM/ROADM configured for line-side protection.
Describes OLA configurations for medium, long, and mixed spans.
Illustrates OLA configurations for long, intermediate, or mixed spans.
Describes shelf configurations and supported applications.
Main shelf processor module running NE software and managing modules.
SPM that can be installed in main or port shelf to perform DPM functions.
Forwards and distributes control traffic and provides management visibility.
Provides reconfigurable multiplexing/demultiplexing of wavelengths.
Manages chromatic dispersion and compensates for signal degradation.
Provides 1+1 port-side or line-side protection.
Control and management module for Tellabs 7100N OTS.
Describes supported transponder modules for the 7100/7100N OTS.
Details alarm detection, reporting, and classification.
Monitors signals and system conditions, providing alarms and performance data.
Monitors system performance data to detect signal quality reduction.
Propagates failure indication over network to shut down laser at far-end.
Configures transponders to shut down laser to OPSM for port-side protection.
Configures transponders to shut down laser to OPSM for line-side protection.
Proactively addresses conditions with signal and equipment protection.
Provides equipment and path protection using OPSM with transponder modules.
Limits transmission distance and impacts bit error rates.
Impacts signal speed due to physical imperfections in the fiber.
Overview of metro DWDM systems, scalable architecture, and multiservice delivery.
Lists supported 44- and 88-channel network configurations including SBOADM and OLA.
New control plane features including flexible path protection and dynamic re-route.
Details improvements in packet support, including MPLS LAG and IGMP snooping.
Describes new hardware features in FP5.1.x, including amplifier modules.
Provides server/client management structure for 7100/7100N OTS network.
Graphical user interface for turn-up, provisioning, and maintenance.
Provides primary non-volatile local backup and secondary external server backup.
Supports in-service upgrades that do not impact system traffic.
Continuously monitors signals and system conditions, reporting failures.
Assists in identifying root causes of alarms affecting a circuit.
Offers configurable security profiles for users and NE access control.
Provides functions for provisioning, administration, and maintenance of NEs.
Discovers circuits on the OCH layer, including resource lists and entities.
Provisions circuits on the optical layer and completes via circuit discovery.
Describes features that support system performance monitoring.
Monitors PM on circuit paths supported by multiple NEs and isolates trouble areas.
Provides dynamic call provisioning across the data transport network.
Circular topology connecting NEs to form an unbroken ring for signal paths.
Feature-rich, eight-channel system for metro networks with smaller footprint.
Grid-type topology connected by fiber spans for alternate paths and protection.
Eliminates connections between modules, providing a direct path.
Describes hardware configurations supported on Tellabs 7100 OTS/7100N OTS.
Details module installation in main shelves for SBOADM configurations.
Describes optical line amplifier applications in the main shelf.
Describes port shelf layouts for Tellabs 7100 OTS and Tellabs 7100N OTS.
Shows SBOADM/ROADM configured for port-side protection.
Shows SBOADM/ROADM configured for line-side protection.
Describes OLA configurations for medium, long, and mixed spans.
Illustrates OLA configurations for long, intermediate, or mixed spans.
Describes shelf configurations and supported applications.
Main shelf processor module running NE software and managing modules.
SPM that can be installed in main or port shelf to perform DPM functions.
Forwards and distributes control traffic and provides management visibility.
Provides reconfigurable multiplexing/demultiplexing of wavelengths.
Manages chromatic dispersion and compensates for signal degradation.
Provides 1+1 port-side or line-side protection.
Control and management module for Tellabs 7100N OTS.
Describes supported transponder modules for the 7100/7100N OTS.
Details alarm detection, reporting, and classification.
Monitors signals and system conditions, providing alarms and performance data.
Monitors system performance data to detect signal quality reduction.
Propagates failure indication over network to shut down laser at far-end.
Configures transponders to shut down laser to OPSM for port-side protection.
Configures transponders to shut down laser to OPSM for line-side protection.
Proactively addresses conditions with signal and equipment protection.
Provides equipment and path protection using OPSM with transponder modules.
Limits transmission distance and impacts bit error rates.
Impacts signal speed due to physical imperfections in the fiber.
General| Brand | Tellabs |
|---|---|
| Model | 7100 |
| Category | Network Hardware |
| Language | English |
To Next Page