Need help?Do you have a question about the Tellabs 8600 and is the answer not in the manual?
Lists related Tellabs 8600 series manuals for comprehensive information.
Explains symbols and formatting used in the manual for clarity.
Summarizes supported modes for interface types like E1/DS1.
Describes fixed and virtual Ethernet interfaces and supported modules.
Details its modular architecture and supported Physical Line Modules.
Describes different media types of Line Modules supported by the switches.
Details the types of High Speed Modules supported by the switches.
Explains the principles and filtering mechanisms for TDM fault management.
Covers G.826 performance monitoring for E1/P12s and DS1 interfaces.
Details GR-253/GR-820 performance monitoring for DS1 interfaces.
Explains DS1 loopback operations, including line and equipment loops.
Describes inband and bit-patterned methods for remote loopback activation.
Provides fundamental commands for interface setup and activation.
Shows essential commands for configuring Ethernet interfaces.
Illustrates commands for creating and managing VLANs on interfaces.
Details how to check the status of MGMT port protection.
Describes configuration options for Physical Layer of PDH interfaces.
Explains Ethernet physical and OAM layer configurations.
Details configuration options for Point-to-Point Protocol interfaces.
Lists related Tellabs 8600 series manuals for comprehensive information.
Explains symbols and formatting used in the manual for clarity.
Summarizes supported modes for interface types like E1/DS1.
Describes fixed and virtual Ethernet interfaces and supported modules.
Details its modular architecture and supported Physical Line Modules.
Describes different media types of Line Modules supported by the switches.
Details the types of High Speed Modules supported by the switches.
Explains the principles and filtering mechanisms for TDM fault management.
Covers G.826 performance monitoring for E1/P12s and DS1 interfaces.
Details GR-253/GR-820 performance monitoring for DS1 interfaces.
Explains DS1 loopback operations, including line and equipment loops.
Describes inband and bit-patterned methods for remote loopback activation.
Provides fundamental commands for interface setup and activation.
Shows essential commands for configuring Ethernet interfaces.
Illustrates commands for creating and managing VLANs on interfaces.
Details how to check the status of MGMT port protection.
Describes configuration options for Physical Layer of PDH interfaces.
Explains Ethernet physical and OAM layer configurations.
Details configuration options for Point-to-Point Protocol interfaces.
General| Model | 8600 |
|---|---|
| Architecture | Modular |
| Ports | Multiple 10G Ethernet |
| Interfaces | Gigabit Ethernet, 10 Gigabit Ethernet |
| Supported Protocols | MPLS, IPv4, IPv6, BGP, OSPF, IS-IS |
| Dimensions | Varies by configuration |
| Operating Temperature | 0°C to 40°C |
| Management | Command Line Interface (CLI), SNMP, Web-based GUI |
| Redundancy | Power supplies, fan trays, control cards, and fabric modules |
To Next Page
