EasyManua.ls Logo

tellefsdal AUTO WRAP 1200 EH User Manual

Default Icon
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
2 February 2003
USER'S MANUAL
NORSE AUTO WRAP 1200 EH
CHAP. CONTENTS PAGE
1.0 INTRODUCTION 3
2.0 SAFETY PRECAUTIONS 4
3.0 GENERAL INFORMATION ON BALEWRAPPING 8
4.0 SETTING UP / MOUNTING OF THE MACHINE 10
5.0 EMERGENCY STOP* (Momentarily stop) 14
6.0 MOUNTING OF PLASTIC FILM 15
7.0 REMOTE CONTROL UNIT, CR 900 16
8.0 SPEED SETTING OF THE WRAPPING ARM 22
9.0 ADJUSTING THE OVERLAP 23
10.0 OPERATION INSTRUCTION 24
11.0
12.0 PERIODIC MAINTENANCE 26
13.0 ELECTRIC CIRCUT 29
14.0 DESCRIPTION OF HYDRAULICS 30
15.0 CHECK POINTS BEFORE TROUBLE SHOOTING 34
16.0 PROCEDURE OF TROUBLE SHOOTING 35
17.0 TROUBLE SHOOTING 36
18.0 HYDRAULIC CHART 38
19.0 WARRANTY TERMS 39
* Emergency stop: see chapter 2.1
1
Question and Answer IconNeed help?

Do you have a question about the tellefsdal AUTO WRAP 1200 EH and is the answer not in the manual?

tellefsdal AUTO WRAP 1200 EH Specifications

General IconGeneral
Brandtellefsdal
ModelAUTO WRAP 1200 EH
CategoryLifting Systems
LanguageEnglish

Summary

Safety and Hazard Awareness

General Safety Precautions

Ensure guards are fitted, operate safely, and follow instructions.

Emergency Stop System Functionality

How the emergency stop functions, its components, and testing procedures.

Dangerous Areas Identification

Identification of hazards like wrapping arm pinch points and squeeze dangers.

Machine Setup and Mounting

Mounting Procedures

Instructions for three-point linkage and front loader mounting, including checklist.

Top Link and Leveling Adjustment

Adjusting the top link for machine leveling and tilting during wrapping.

Operation and Control

Control Box and Display Functions

Explanation of display unit and panel functions for operating the machine.

Wrapping Arm Speed and Overlap Settings

Setting wrapping arm speed and adjusting film overlap for optimal bale wrapping.

Operation Instruction Steps

Step-by-step guide for loading, starting, and stopping the bale wrapping process.

Technical Systems and Maintenance

Periodic Maintenance Schedule

Guidelines for regular maintenance of machine components.

Electric and Hydraulic Systems Overview

Overview of electric circuit, power supply, and hydraulic system operation.

Troubleshooting and Problem Solving

Pre-Troubleshooting Checks

Essential checks for oil pressure, oil amount, and electric power before diagnosing issues.

Common Troubleshooting Procedures

Procedures for troubleshooting magnet valves, wrapping arm rotation, and other functions.