To Next PageTo Next Page
Need help?Do you have a question about the tellefsdal AUTO WRAP 1514 and is the answer not in the manual?
Ensure all guards and covers are securely fitted before operation.
Contact dealer for unclear operation or maintenance procedures.
Turn off tractor and discharge oil pressure before adjustments or maintenance.
Identifies specific areas on the machine that pose a risk of injury.
Secure the wrapping arm with a locking bolt when the machine is not in use.
Outlines essential safety measures for road transport.
Instructions for lifting and securing the machine's tower.
Procedures for attaching the prestretcher and wrapping arm.
Steps to mount the emergency stop releasing arm.
Details on rear three-point linkage and front loader mounting.
Guides for connecting power and hydraulic systems.
A list of checks to perform before operating the machine.
Guide to programming parameters and settings via the control box.
Steps for loading a bale and adjusting clamping pressure.
Checks for adequate oil pressure (180 bar) and flow (15-25 L/min).
Verifying counter pressure (max 10 bar) and battery voltage (12V).
How to check if magnet valves are receiving power or are dirty.
Verifies the emergency stop circuit is closed for operation.
General| Brand | tellefsdal |
|---|---|
| Model | AUTO WRAP 1514 |
| Category | Stretch Wrapping Systems |
| Language | English |
